Large-span roofs are engineered to the project, not selected from a catalogue. The main considerations are:
Structural loads and span
Wind, snow and the weight of the roof itself all act on the structure, and these increase in importance as the width grows. Loads should be assessed with the project’s structural engineer.
Roof weight
OSS states that roof weight is proportional to span, at around 14kg per square metre up to 10m and around 20kg per square metre above.
Movement and track design
Roof sections run on tracks and cast nylon rollers. OSS states that track thickness is 15mm up to a 10m span and 25mm above it.
Site exposure and drainage
Exposure to wind and rain influences the design, and drainage needs to cope with the larger roof area.
Access and installation
Large components need planned access, storage and, depending on the site, lifting. Installation methodology is agreed with the contractor; see the installation process.
Interfaces with existing structures
Where the roof meets an existing building, the loads and fixings at the interface need to be coordinated by the design team.